Introduction to Game Hosting

Languages:  English  • Deutsch  • español  • français  • italiano  • 日本語

BEGINNER
THIS IS A BEGINNER ARTICLE

Introduction

As seen in the Introduction to Mapping, MapTool lets you create virtual maps and virtual "miniatures" (which are known in MapTool jargon as tokens) to be used for playing a roleplaying game session, much like you would use a real map and real miniatures on a tabletop. In fact, that's why we call MapTool a "virtual tabletop," or "VTT." In this guide, we'll walk through MapTool's fundamental reason to be: sharing a map with other players via the Internet.

Note: MapTool is not only useful for online play - many people use it for their face to face sessions too, because you can do things with a virtual map that you can't do with a physical one. Also, you're less likely to dump Mountain Dew on it. However, this guide will assume that you're playing online.

The Introduction to Mapping guided you through the basic steps to get MapTool, open it up, and put a map and some tokens on it. It also talked about saving Campaign Files, how you can move and zoom the map, and how to move tokens around. These are essential features of the program, without which none of the rest would be worth reading about!

Since hosting is no fun without people connecting to your game, the last section of this guide covers how to connect to a MapTool server. You'll need to tell your friends how to do that, so make sure to read that section!

Finally, since this guide is about hosting an online game, "you" will always mean "the person who is running the server."

Architecture

When used for online gaming, MapTool uses a client-server architecture. In other words, one person (usually the GM, but not always) uses MapTool to start a server, and the other people in the group then connect to that server as clients.

Once you start the server and everyone is connected, the campaign file (with all the maps, tokens, and other info) is then shared among all the players, so that everyone sees the same map and can watch as they and their friends move tokens around, enter text in the chat window, and have a great time.

A Word About Networking Stuff

One of the challenges in setting up a MapTool game (like many client-server applications, including many other Virtual Tabletop programs) is configuring your home network to permit your friends to connect to your MapTool server.

There are several ways to set up your network to allow Maptool to be hosted over the internet. UPnP, port forwarding, or an external Virtual Private Networking software package. Depending on your computer, ISP, and hardware (such as cable/DSL modem and/or router), will determine which of these options will work for your setup - with the wide variation in home networks and networking hardware, it's not possible to give a single set of rules that will guarantee success.

UPnP

An alternative to port forwarding - if it's available on your router - is called UPnP (short for Universal Plug-and-Play). This feature, instead of permanently saying "Port XYZ traffic goes here!", will instead tell the router "for a little while - while we're playing - I'm gonna have to go ahead and ask you to open up Port XYZ for us. That would be greeaaaat."

In other words, it makes the handling of ports and incoming and outgoing traffic a little more seamless and simple. Of course, the downside is that not everything supports UPnP, and you'll have to figure out whether your network can do it. However, if your network hardware supports UPnP, it is by far the easiest way to get your MapTool server up and running.

Port Forwarding

For home networks that use a router or physical firewall, you will probably need to configure port forwarding. This is a mechanism by which information coming to your network, and arriving on a specific port, is sent to the right place inside your network. This is important for you as the MapTool server person, since your friends need to be sending information to the right place!

The specifics of configuring port forwarding will depend on your hardware, so you'll have to check your manual for that one. But the basic idea is that you indicate two things to the router/switch/firewall:

1. Which port MapTool will use (more on MapTool ports later!) - this is telling the router "information will be coming in on Port XYZ; pay attention!"
2. Which computer, inside the network, that information needs to go to - basically, "and when you see information coming in on Port XYZ, send it here"
   1. Incidentally, setting up port forwarding also tells the router where it can stick outgoing information, too.

That is port forwarding in a nutshell, and the reason you need to set it up is that most routers (especially if they're configured securely and properly) are not going to just allow random incoming information to get through.

More and Better Networking Information

I was all set to write an elaborate section on networking, when I realized that there is an excellent FAQ written by Azhrei at the MapTool Forums (and an wiki-ized version is Network Connection Problems and Solutions). If you are unfamiliar with concepts like Port Forwarding, configuring your router, or how networks work (in general), please read the FAQ. In addition, the Networking FAQ includes step-by-step diagnostic procedure that will isolate which part of the network is failing to transfer packets for you. Once you know where the problem is, solutions are easier!

If you are familiar with network configuration and managing your home network (especially if you can set up software to act as a server, or have set up port forwarding on your network for other applications), setting up MapTool to act as a server will be old hat: you'll basically need to configure port forwarding or UPnP on your router to permit MapTool network traffic to pass.

If you need specific information on port forwarding configuration for your network hardware, check out Portforward.com for an extensive collection of how-to documents for specific network hardware and specific software packages.

On the other hand, if all that stuff above made no sense to you: read the Networking FAQ! All will be revealed!

Now, let's get on with it.

Starting Up a MapTool Server

MapTool Easy Connect

MapTool Easy Connect is a largely automated way to use encrypted password files to connect to a remote server, which is far more secure than a simple password.

This change comes into affect when the server is started with the "Use MapTool Easy Connect" check box is selected. Selecting easy connect also selects the "Use MapTool password file" option and it can not be deselcted.

The Players Connect using Public Key

If the Server does not know about the player and public key combinations

If the server does not know about the player and public key combinations the players will be prompted with dialogs like below.

This number needs to be shared with the GM (via discord, chat, telepathy, etc...) so that they can assure that the player they are approving is the correct player.

Approving the new connections

The person that is running the server will have to approve the new connections before the players can log in. This can be done from the Connections window (Windows -> Connections).

The PIN in this window will match the PIN displayed to the player.

Denying connection attempt

If the players PIN does not match yours (or you don't know the person trying to connect). Click on the deny button and that will end the pending connection

Approving the connection attempt

If you approve the connection attempt the player and public key will be added to the player database

And the player will be connected

Future connections for the same player / public key will not need you to approve them unless you remove the player from the player database.

Assumptions

From here on out, these instructions assume that you have configured your network to handle MapTool traffic (via port forwarding or UPnP, for example). If not, you'll have to figure out how to do that before it will be possible to start a server that your friends can use. The Network Connection Problems and Solutions guide may help.

The Start Server Dialog

Selecting Start Server from the File menu

The Start Server dialog

1. Go to File > Start Server.

2. You will now see the Start Server dialog. There are a lot of options here.

Server Options and Settings

Configuration Settings

• Username: this is the name that will appear in chat and in the Connections window; you can set it to be anything you like.
• Role: this drop down box lets you tell MapTool what kind of user you are: are you the GM (and therefore in possession of Total Cosmic Power over all of the MapTool functions?) or are you a player, who lives at the GM's every whim (or, in other words, only has access to player functions)? Note that a game can have more than 1 GM!
• Port: A very important setting, this is where you tell MapTool what port you've configured your router to forward. If you give it the wrong port, MapTool traffic will be unable to enter or leave your network, and you will have no game!
• RPTools Alias: this field allows you to set up an "alias" for your server to appear on the RPTools server registry. It basically lets you tell your players "look for the server named Awesome Server and connect to it," instead of "connect to the server at IP Address 123.45.678.9"
• Passwords: you can protect access to your server by configuring passwords. Setting a password on the server is required; the server will not start without both GM and Player passwords. There are two password categories:
  • GM: the GM password is used to provide someone with full access to the campaign remotely, though there are a small number of features which cannot be done remotely, such as loading a campaign. The GM password is typically used for a secondary GM so that GM duties may be shared, but can also be used in cases where the GM may not be able to get hosting set up properly and has one of his players host the session.
  • Player: people connecting to the server in the "Player" role will use this password to connect.
  • Use MapTool Password File: Please review the page on Player Databases for more information on this.

Ownership, Vision, and Behavior

• Strict Token Ownership: MapTool uses a concept called "token ownership" to control who can select, move, or look at the properties of a particular token. If you enable Strict Token Ownership, only the owner of a particular token may perform any actions on it - everyone else is confined to looking at the token.
• GM reveals vision On Movement for Unowned Tokens: If enabled, movement of unowned tokens with vision enabled by the GM will expose Fog of War. If Individual Fog of War is not enabled this means that Players will see the exposed areas as the token is moved.
• Players can reveal vision: MapTool has a vision and fog-of-war system (where you can configure how tokens "see" the map). With this option enabled, players can reveal the area that is "visible" to their token without GM intervention (in other words, an area hidden to the token is covered by Fog of War, and appears opaque on the screen; when you reveal it, the opaque overlay is cleared, and the map underneath becomes visible). Otherwise, the GM must do all reveals.
  • Auto Reveal On Movement: Enabling this will let tokens reveal the map as the tokens are moved.
• Use Individual Views: in the vision system mentioned above, player tokens can either "share" their vision (i.e., everyone sees what each PC type token sees) or they can have individualized views.
  • Use Individual FOW: means that token's don't share the exposed areas and can only see where the individual token has been.
• Allow Players to Impersonate any token: This means that players can impersonate any token whether they owner it (see above) or not.
• Players Receive Campaign Macros: MapTool lets you write macros, which are basically sequences of text, token, and dice rolling commands used to automate certain activities - basically, a short script that does something. The GM can create "Campaign Macros" which become available to all players if this option is checked.
• Use Tooltip for [] rolls: Enabling this option makes any dice roll you enclose in square brackets show only the roll result, and display the full roll details if you hover your mouse over the result.
• Hide the map select UI from players: This will hide the Map Select button from players, preventing them from going to other maps on their own.

• Lock Player Token Editor: This will preset the option to prevent players from opening the Edit Token window, either by double-clicking on it or using Edit on the context menu. This option also can be turned on and off from the Tool menu in the main MapTool screen.
• Lock Player Movement: This will preset the option to lock player movement on tokens they own. It can be also turned on and off in the Tool menu main MapTool screen.
• Hide Player Library: This hides the Library panel for those who connect as Players.

Testing the Connection

Before you start your server, it is a good idea to hit the Test Connection button. This will send a message out to a server at RPTools.net asking that it attempt to connect to your computer - in other words, the RPTools connection testing server will find out if it can see your computer over the network!

What you want to see is Success! I can see your computer! If you get that, you can be pretty sure that your server will be visible when you start it up.

If you do not see a message proclaiming a successful connection test, you will need to investigate port forwarding and your network configuration to make sure you have the right ports configured and everything properly arranged._{This description is deprecated.}

Note: The test connection was frequently broken and has so caused lots of trouble. Thus it was removed in b76 (or so). The Start Server Dialog now has a button "Networking Help" that leads you to the Networking FAQ in the forums. This is really the place to go. Read it (yes, read it not skim it!) and follow all steps. If that doesn't help the community will very likely be able to help you out.

For a quick connection test you can use canyouseeme.org[1]

Get your Connection Information and Tell Your Friends

Opening Connection Information from the File menu

The Connection Information dialog

Assuming that you had a successful connection test, and you clicked OK to start the server, you can then check out your Connection Information to double-check the settings. These settings will need to be passed on to your friends so that they can connect to the server.

1. Go to File > Connection Information.

This will display what MapTool currently knows about your computer. Since you haven't started a server quite yet, you'll just see your computers internal and external IP addresses (this is useful info, though, especially if you haven't quite set up port forwarding!).

When a server is started, you will also see the name of the server (if you give it one), and the network port that server traffic will use.

2. Provide this information to your friends: tell them the Server Name (a.k.a. the RPTools Alias, if you set one), the external IP address, and the port. They will need to put this into the Connect to Server dialog when they attempt to log in to your server.

Connecting to a MapTool Server

The steps leading up to this point walked you through setting up a MapTool server so that people can connect to it. Of course, if you don't have anyone connecting to your server, things are going to get pretty boring pretty quick. These steps are focused on your friends who will be connecting to the server you just created.

Assumptions

The following information assumes that all of the following are true! Lacking any of these is going to make for a very short trip.

• You have friends
• You have a MapTool server running
• Your friends know the following:
  • Either the server's Name OR what the server's External Address is (or preferably, both!)
  • What the appropriate password is (either GM or Player password)
  • What Port the server is using
• VERY IMPORTANT: Your friends are using the same version of MapTool that you are using!

Open the Connect to Server Dialog

The Connect to Server dialog

If the assumptions mentioned above are met, here's what you tell your friends:

1. Go to File > Connect to Server to see the Connect to Server dialog.

2. Enter a User name. This can be anything your friends wish.

3. Enter the password (which you set when you started the server).

4. Choose your Role. Your friends can connect as a GM, or as a Player. Make sure that they pick the right role for the password you're using!

Choose how You will Connect

The Connect to Server dialog presents three ways to connect to a running server.

RPTools.net

The RPTools tab in Connect to Server

This tab (which is shown by default) lists all of the servers listed at the RPTools.net Server Registry. When you set up the server, you had the option to give it an alias, which is what appears in this list. The Server Registry stores the connection information for the server, so your friends can just select the server they want, and hit OK.

LAN

The LAN tab in Connect to Server

This tab will show any servers that are currently running on the local network. This is for when you want to have a MapTool LAN Party, or when all your friends are inside the same network (like if everyone bringes their laptop to your house for game night).

Direct

The Direct tab in Connect to Server

A direct connection is just that - your friends bypass the friendly RPTools.net tab, and simply type in the External Address and port number for the server.

Verifying Connections

As your friends connect to your MapTool server, you will see notifications in the Chat Pane that people have connected to your server, which look like:

JQRandom has connected.

You can also check the Connections Pane to see a list of everyone who is connected to your server. If you do not see the Connections Pane, go to Window > Connections to have it pop into view.

Tokens on your Map

When you're running MapTool by yourself, you've got access to every token and every item on a map, because MapTool assumes that you're the GM (and, therefore, the All-Powerful God of the tiny world represented by the Map). However, when you start hosting a game, MapTool has different roles (mentioned previously) for the different people connecting. The GM role retains it's all-powerful status, able to select and manipulate anything on the map; however, the Player role has a much more restricted set of options, able to control only those items that the player has ownership of.

Because of that, when you start a server, you will need to make sure that you give your players ownership of the Tokens they are supposed to control! This is a common oversight when starting up a new server - forgetting to set token ownership after your players have connected!

Token Ownership is explained in more detail in Introduction to Tokens, but for the purposes of this tutorial, once you've started a server and you've got your friends connected as players, do the following for each player connected to the game:

1. Double click on the token that player will be controlling as their Player Character (see Note, below).
2. Set the token type to PC.
3. Go to the Ownership Tab
4. Check the box next to the player's name, granting them ownership of the token.
5. Click OK to save the changes.

Once you do this, the players will be able to move and edit their own tokens. You can also grant ownership of a token to All Players, if everyone needs to manipulate it.

NOTE: players can have ownership of NPC tokens if you wish (the process is the same, except you don't do Step #2); however, you'll at least need to make sure they own their own player token!

Languages:  English  • Deutsch  • español  • français  • italiano  • 日本語