MapTool Preferences/fr

Languages:  English  • Deutsch  • français  • italiano  • 日本語

{{#customtitle:Préférences de MapTool|Préférences de MapTool}}

Important : Il existe des préférences liées aux cartes qui vous permettent de définir des valeurs par défaut pour la création de nouvelles cartes. Alors que vous pouvez les modifier durant la création de la carte, certaines ne peuvent pas être modifiées après que la carte ait été créée. Ceci est le comportement de la version 1.3b56 et de toutes les versions antérieures. Les préférences qui suivent ayant ce comportement seront marquées avec

∗

NB : Toutes les captures d'écran de cet article sont montrées avec le paramétrage par défaut, qui n'est pas forcément le paramétrage recommandé pour votre utilisation.

Onglet Interactions

File:prefs tab interactions.png

L'onglet Interactions de la fenêtre de Préférences

Cartes

File:prefs interactions maps.jpg

La section Cartes (Maps)

• New maps have Fog of War (Les nouvelles cartes ont le Brouillard de Guerre)

Détermine si les nouvelles cartes doivent avoir le Brouillard de Guerre activé à la création. Si vous utilisez le Brouillard de Guerre, cela semble évident de ✓ l'activer ; cependant, pendant que l'on crée plusieurs cartes pour une nouvelle campagne, cela semble souvent utile de le désactiver pour faciliter la modification des cartes, étant donné que même en tant que MJ, vous ne verrez pas complètement une carte couverte du Brouillard de Guerre. Lorsque la carte est terminée, il est simple de réactiver le Brouillard de Guerre sur celle-ci.

• New maps visible to players (Les nouvelles cartes sont visibles par les joueurs)

Indique si les nouvelles cartes doivent être marquées 'Visible par les joueurs' (Player Visible) à la création. Bien qu'il y ait des exceptions, avoir cette option ✓ décochée est un paramétrage optimal ; de cette façon, vous ne laissez pas involontairement une carte accessible aux joueurs.

• Default Grid Type (Type de Grille par défaut)

∗

• • Square (Cases) File:gridSquare.png
  • Horizontal Hex (Hexagones horizontaux) File:gridHorizontalHex.png
  • Vertical Hex (Hexagones verticaux) File:gridVerticalHex.png

détermine le type de grille proposé par défaut lors de la création d'une carte. Vous êtes libre de créer des cartes sans type de grille, mais aussi de type différent de celui spécifié ici, mais vous ne pouvez pas mettre le type par défaut proposé à "Sans grille".

• Default Grid Size (Taille de grille par défaut)

∗

représente le nombre de pixels que vous voulez que MapTool utilise pour dessiner chaque cellule de la grille, à la résolution maximum. Le paramétrage par défaut de 50 pixels est idéal pour la plupart des ordinateurs, mais les ordinateurs haut de gamme peuvent gérer 100 ou même 200 pixels. Il n'y aucun pré requis pour utiliser des tailles spécifiques, mais 50 et 100 pixels sont utilisés couramment. Cette préférence déterminera aussi quelle taille prendre une image lorsqu'elle sera placée sur la carte ; si elle n'est pas paramétrée en taille libre (Free-size) et pas manuellement redimensionnée.

• Default Units Per Cell (Nombre d'unités par cellule par défaut)

∗

indique le nombre d'unités de mesure que représente chaque cellule de la grille. L'ambigüe "unité" est utilisé dans ce cas parce que VOUS décidez ce qu'il représente. Si vous voulez que chaque cellule représente 5 pieds (1,5m) comme dans D&D3, ce paramètre devra être saisi à 5. Si voulez que chaque cellule représente une case comme dans D&D4, saisissez 5. Si vous voulez que chaque cellule représente 4 kilomètres, choisissez 4, etc... Cette unité est souvent mentionnée comme la Distance par Cellule (Distance Per Cell).

• Default Vision Distance

∗

The maximum distance that PC Tokens can expose Fog of War after Lights, Sights, and Vision Blocking Layers are taken into account. It is important to note that this setting is measured in Distance Per Cell.

• Movement metric
  • ONE_TWO_ONE
  • ONE_ONE_ONE
  • MANHATTAN
  • NO DIAGONALS

Determines how movement should be calculated when a Token moves diagonally. This affects the total distance displayed beneath a Token when it is moving, or when its previous path is displayed; it is calculated based on Distance Per Cell. ONE_TWO_ONE specifies that every second diagonal movement will calculate as twice the Distance Per Cell. ONE_ONE_ONE specifies that diagonal movement will calculate the same as non-diagonal movement. MANHATTAN specifies that every diagonal movement will calculate as twice the Distance Per Cell. NO DIAGONALS specifies that Tokens can only move non-diagonally. The Movement metric setting only comes into play with maps that use the Square grid type; maps with a Hex grid type calculate movement in any direction using the Distance Per Cell.

Tokens

File:prefs interactions tokens.jpg

Tokens Section

• Start Snap to Grid

Determines if Tokens will default to having Snap to Grid ✓checked. Having this setting ✓checked is optimal for maps that use a grid, but even on such maps there are cases when you might want to temporarily disable this setting(e.g. when placing a lot of "prop" Tokens on the Object layer while drawing a map).

• New tokens visible to players

Determines if new Tokens have the Visible option ✓checked upon creation. The optimal setting for this really depends on your play style; if you have a lot of random encounters and build them during play, you may find it useful to have this setting disabled.

• Duplicate Token Numbering
  • Increment
  • Random 2-digit

Will automatically append numbers to Tokens with duplicate names, upon creation. Increment will leave the first token unnumbered, but will number each duplicate after that, starting with the number 1 (e.g. Troll, Troll 1, Troll 2). Random 2-digit will append a random two-digit number to the token name, even if there are no duplicates on the map yet. Random 2-digit might be considered the optimal setting, as it gives your players no indication of how many copies of that Token can be expected to exist.

• Show Numbering on
  • Name
  • GM Name
  • Both

Specifies where the number that derived from Duplicate Token Numbering is applied. Name appends the number after the name (derived from New Token Naming). GM Name places the number within the GM Name field of the Token options. Both appends the number after the name, and places it within the GM Name field of the Token options. Due to odd behaviour that MapTool will display when handling tokens with the same name, it is recommended that you use Name or Both, but not GM Name.

• New Token Naming
  • Use Filename
  • Use "Creature"

Determines what the name will be when creating a new Token, or what the Name field will be pre-filled with in a new Token dialog. Use Filename specifies that the name will be derived from the name of the file that was added to your Resource Library (e.g. if you add the file uglytroll.jpg to your Resource Library, tokens created from that image will begin with the name uglytroll). Use "Creature" defaults all new Tokens to being named "Creature" (without quotes).

• Start Freesize

If you are using a map with a grid, Tokens typically default to the size of one grid cell upon creation. Having this setting ✓checked allows you to have them default to Freesize, which is very useful for when you're placing a lot of 'prop' Tokens on the Object layer while creating a map.

• Show Dialog on New Token

When this setting is ✓checked, a New Token dialog will open when you drag an image onto the map, allowing you to set some options prior to creation. If you disable this setting, all new tokens will be created with the default settings derived from previous settings in this section.

• Stat Sheet Portrait Size (Set to 0 to disable portaits)

Sets the width (in pixels) of the portrait that is displayed in the lower left corner of the map when mousing over certain Tokens; the image is resized proportionately. A portrait is displayed under a few different circumstances; if the Token has properties that are set to display on the stat sheet, and those properties have values, the portrait will display the token image. If the Token has a portrait image set, it will display with or without a stat sheet. Why might you want to set this to 0? Besides the obvious reason of not displaying the portrait, you might want to use a stat sheet, but not want a portrait displayed with it; or perhaps you don't want to use a stat sheet or a portrait, but would like to have the portrait image 'slot' usable for other purposes, like inside a Dialog or Frame.

Chat

File:prefs interactions chat.jpg

Chat Section

• Show Avatar per line

The image for the impersonated token is shown next to any chat output it creates, when this is ✓checked. This is a client-side setting and does not effect any other clients connected to the same game.

• Insert Smilies

Replaces common smiley(emoticon) character sequences with graphical smilies when this is ✓checked. If you use a lot of macros, it is recommended that you turn this off, as it could cause some complications if any of your macro code is interpreted as a smiley.

• Use ToolTips for Inline Rolls

Sets the default display (Display Roll Option) for rolls in the chat panel. Will use [tooltip:] if this is ✓checked, otherwise it will default to [expanded:].

• Trusted Prefix Background

Sets a custom background for macro output that comes from a Trusted Macro.

• Trusted Prefix Foreground

Sets a custom foreground (text color) for macro output that comes from a Trusted Macro.

• Time between autosaves

The amount of time in minutes between the autosaving of the chat log. This is not functional as of 1.3b54.

• Autosave Chat Log Filename

The filename that will be used when automatically saving your chat log. This is not functional as of 1.3b54.

Objects

File:prefs interactions objects.jpg

Objects Section

• Start Snap to Grid

Tokens created on map's Object layer will automatically be set to Snap to Grid if this is ✓checked.

• Start Freesize

Tokens created on a map's Object layer will automatically be set to Freesize if this is ✓checked.

Backgrounds

File:prefs interactions backgrounds.jpg

Backgrounds Section

• Start Snap to Grid

Images dropped on a map's Background layer will automatically be set to Snap to Grid, if this is ✓checked.

• Start Freesize

Images dropped on a map's Background layer will automatically be set to Freesize, if this is ✓checked.

Facing

File:prefs interactions facing.jpg

Facing Section

• On Edges

A token's facing will snap to the edges when ✓checked. Edges are the lines that make up a grid cell.

• On Vertices

A token's facing will snap to the vertices when ✓checked. Vertices are the points that connect the lines that make up a grid cell.

Accessibility Tab

File:prefs tab accessibility.png

Accessibility Tab on the Preferences Dialog

File:prefs accessibility all.jpg

Accessibility Tab Close-up

• Chat Font Size

The default size of the font in the chat panel; measured in points.

• ToolTip Initial Delay

The time it takes for a tooltip to display when hovering the mouse over an element that possesses a tooltip; measured in miliseconds.

• ToolTip Dismiss Delay

The time it takes for a tooltip to disappear when hovering the mouse over an element that possesses a tooltip; measured in miliseconds.

Application Tab

File:prefs tab application.png

Application Tab on the Preferences Dialog

Save

File:prefs application save.jpg

Save Section

• Save Autorecover every [ ] min

Saves a copy of your campaign in the interval specified. Unlike Autosave, this will not overwrite your campaign file, but rather create a new one every time it automatically saves.

• Save reminder on close

Displays a dialog when attempting to close the program with unsaved changes to your campaign when ✓checked.

• 1.3b50 Compatability Mode

Due to some changes in how certain data is stored in the campaign file in versions after 1.3b50, they might not be compatible with version 1.3b50 and earlier. If this is ✓checked your campaign will be saved in the older format, allowing it to be opened in older versions, but losing some of the new features.

Map Defaults

File:prefs application mapdefaults.jpg

Map Defaults Section

• Halo line width

Controls the width of the Halo when it is displayed on a Token.

• Vision opacity

Areas that are no longer directly visible, but have previously had their Fog of War exposed, will will be dimmed by layering a translucent black on top of them. This setting controls the opacity of the translucent black.

• Use halo color for vision

Related to Vision opacity, if this setting is ✓checked, the translucent color layered on top of previously viewed areas will be the Token's Halo color as opposed to black.

• Autoshow Fog

Will automatically expose Fog of War after moving a Token if ✓checked.

Macro Panels

File:prefs application macropanels.jpg

Macro Panels Section

• Default: Allow Players to Edit Macros

In order for a macro to be considered a Trusted Macro, players must not be able to edit it. This setting determines if a new macro should default to allowing players to edit if ✓checked. Disabling this setting can be very useful if you intend to create a lot of macros that you intend to be trusted.

Sounds Tab

File:prefs tab sounds.png

Sounds Tab on the Preferences Dialog

File:prefs sounds all.jpg

Sounds Tab Close-up

• Play system sounds

When ✓checked, MapTool will play a sound when new content is sent to the chat panel.

• Only when window not focused

When ✓checked, the sound that MapTool plays when new content is sent to the chat panel will only play if MapTool is not the application that has focus.

Languages:  English  • Deutsch  • français  • italiano  • 日本語