Creating Macro Buttons Using a Macro

From RPTools Wiki
Jump to navigation Jump to search

Introduction

The following tutorial illustrates one method of creating macro buttons for a token based on user input. In this particular case, the macros illustrated below are used to configure a new token with several buttons illustrating different powers that the character represented by the token possesses. The tutorial is directly applicable to the Dungeons & Dragons 4th Edition game system, but the concepts in it may be applicable to other game systems. This tutorial may also be useful in conjunction with the tutorials on changing macro buttons.

Assumptions

The button creation macro illustrated below is actually one component of a much larger sequence of macros, so in order to understand what is happening, there are a few assumptions to be made.

1. Powers in this campaign setup are stored in a series of token properties with the names "Power0", "Power1", "Power2", and so on. These token properties contain power information in the form of a string property list with the format:

powername=Melee Basic Attack ; action=standard ; usage=at-will ; attack=5 ;
against=AC ; targets=one creature ; damage=1d6+5 ; critdamage=11 ; damtype= ;
hitEffect=--none-- ; missEffect=--none-- ; atktype=melee ;
range=weapon ; expended=Available ; reliable=0 ; special=--none-- ;

2. This macro will receive from a calling macro an argument called macro.args that contains a number (which will be used to determine which power - Power0, Power1, etc. - will have a new button created).

3. This macro in particular is the final step in a macro sequence, so it is assumed that when this macro is called, the string property list for the power in question has already been populated.

Macro Code and Explanation

The full macro code is broken down and explained below.

Receiving Arguments and Assigning Variables

[h:powerSlot=macro.args]
[h:pname=getStrProp(eval("Power"+powerSlot),"powername")]
[h:use=getStrProp(eval("Power"+powerSlot),"usage")]

This section of the macro simply assigns the value of macro.args to a new variable, powerSlot. The variable powerSlot is then used in line 2 to extract the name of the power (the powername key in the string property) and assign it to pname, and to extract the usage value from the string property as well.

Requesting User Input

[h:status=input(
	"addButtons|Yes,No|Add Macro Buttons to your token?|RADIO|ORIENT=H SELECT=1"
)]
[h:abort(status)]

This section is a simple input() function that confirms whether the user wants to add the button to their token's macro set. This is important because if a macro button is already present, this macro will create a duplicate. Frequently, however, users will want to simply update their power information, rather than create a new button.

Checking for the Power's Use Limits and Setting Colors

[IF(addButtons==0),CODE:
{
[h,SWITCH(use),CODE:
case "at-will":
{
  [bcolor="green"]
  [fcolor="black"]
  [group="1: Powers - At-Will"]
  [grayout=0]
};
case "encounter":
{
  [bcolor="red"]
  [fcolor="white"]
  [group="2: Powers - Encounter"]
  [grayout=1]
};
case "daily":
{
  [bcolor="black"]
  [fcolor="white"]
  [group="3: Powers - Daily"]
  [grayout=1]
};
case "recharge":
{
  [bcolor="blue"]
  [fcolor="white"]
  [group="3: Powers - Recharging"]
  [grayout=1]
};]

This is probably the most complex piece of the macro: a SWITCH() roll option nested inside an IF() option, both of which use the CODE:{ } option to execute multiple macro commands as a single block.

However, functionally, this segment's purpose is to assign several variables (to be used later) based on whether the power is an at-will, encounter, daily, or rechargeable power; remember that this entire SWITCH() block is contained within the first code block of the IF() statement.

Building the Macro Button Contents

[h:macroProps="autoexec=true;"]
[h:macroProps=setStrProp(macroProps,"color",bcolor)]
[h:macroProps=setStrProp(macroProps,"fontColor",fcolor)]
[h:macroProps=setStrProp(macroProps,"group",group)]
[h:grayoutString=""]
[h,IF(grayout): grayoutString=encode("[h:setMacroProps(" + "'" +pname+ "'" + ",'color=gray;' " + ")]")]
[h:command=encode("[h:thisPower="+"'"+pname+"'"+"]")]
[h:command=command+encode("[h:index=getMacroIndexes(thisPower)]")]
[h:command=command+encode("[h:mProps=getMacroProps(index)]")]
[h:command=command+encode("[h:color=getStrProp(mProps,'color')]")]
[h:command=command+encode("[h:used=if(color=='gray', 0, 1)]")]
[h:command=command+encode("[h:abort(used)]")]
[h:command=command + encode("[MACRO('AttackMain@Lib:test'):thisPower]")]
[h:command=command+grayoutString]

This sequence may appear confusing, but it is conceptually relatively simple. Because a macro button must contain macro instructions, this segment of macro code builds a string using the encode() function.

In this case, encode() is used because macro commands require the square bracket ([ ]), but the macro parser has a tendency to attempt to evaluate anything in square brackets as a command, which - if you get a quotation mark out of place - will cause various frustrating and eldritch errors. To prevent this, we use single and double quotation marks to ensure that each element of the final string is treated as a string, and then encode() the whole result to a single string.

Specifically:

  • Lines 1-4 set the macro properties based on the output of the earlier SWITCH() statement, each step adding an additional key-value pair to the macro property string.
  • Lines 5-6 check to see if the grayout variable is true, and if so create an encoded string adding a command to change the color of the button to gray when the button is clicked.
  • Lines 7-1 iteratively assemble the command variable as an encoded string (the steps are broken down to make sure that the strings are handled properly by the parser). These steps create a sequence of commands that will, when the user clicks the button:
  1. Call a macro on a library token to resolve the use of the power
  2. If the macro is an encounter or daily power, change the macro button color to gray
  3. If the macro is an encounter or daily power, prevent the macro from executing if the button is clicked again

Creating the Macro Button

[h:createMacro(pname, decode(command), macroProps)]
Buttons added.
};

This step is the easy part! We call the createMacro() function and pass the arguments pname (containing the power's name), the decoded command string (containing all of the macro commands we wish the new button to contain), and the variable macroProps (which sets the initial button and font colors, group, and other properties we wish the new button to have).

Note that line three contains the closing brace of this CODE() block - be sure to close your CODE blocks properly!

Mop-Up

{
No buttons added to token.
};]

This tiny section at the very end is what is executed if the user does not wish to add buttons to their token. It is the false_body of the IF(), and will simply echo "No buttons added to token." to the chat window.

The Result

When this macro is finished processing, the end result is that the token in question should have a new macro button generated containing the command sequence we assembled in the command variable. An example of the output - using the sample string property list shown in the Assumptions section - is shown below:

[h:thisPower='Melee Basic Attack']
[MACRO('AttackMain@Lib:test'):thisPower]

Another sample, this one including the grayout power information as well as the additional code to prevent repeat execution of the macro:

[h:thisPower='Chain Lightning']
[h:index=getMacroIndexes(thisPower)]
[h:mProps=getMacroProps(index)]
[h:color=getStrProp(mProps,'color')]
[h:used=if(color=='gray', 0, 1)]
[h:abort(used)]
[MACRO('AttackMain@Lib:test'):thisPower]
[h:setMacroProps('Chain Lightning','color=gray;' )]

NOTE: Although I have introduced line breaks in the examples above for ease of reading, the actual commands in the macro button do not have any line breaks between them. It requires some relatively convoluted use of strings and string concatenation to create easy-to-read command sequences via createMacro(). Future builds of MapTool should remedy this situation.

See Also

createMacro(), setMacroCommand(), setMacroProps()